|Phase||Double Phase, Single Phase|
|Product Code||ASTM : D 1559-T-62|
The Test is applicable to hot mix designs using bitumen and aggregates up to a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs.
These are two major features of the Marshall Method of designing mixes namely :
The Apparatus consists of : A loading unit motorized, capacity 5000kgf with two telescopic pillars and an adjustable cross head. Limit switches are fitted inside to control upward or downward movement of the pillars. On off reversing switch and indicator lamps are on the front side while a hand wheel to manually move the pillars is on the right. The load frame has fixed speed of 5.80cm per minute, operated on 230 volts AC. One number Compaction pedal with specimen mould holder. 2 Nos Compaction Rammers, 4.5kg weight and free fall 45.7cm. One number Breaking head assembly with provision to fix flowmeter. 3 Nos Specimen Mould 10.16cm I.D. x 7.6cm high with base plate and extension collar. One number Kit for specimen extraction, consists of one each load transfer bar, steel ball, specimen extracting plate. Integral type Proving Ring capacity 5000 kgs. A dial gauge 0.01 x 25mm Marshall Stability Testing Apparatus With Accessories 100MM Marshall Stability Testing Apparatus With Accessories 150M